Sökresultat

"SUPER-ASS" SWINGARM KITS FOR 1991 THRU 1999 SOFTAILS AND ZODIAC WIDETAIL FRAMES

The Super-Ass swingarm kit is for those that want to convert their Softail or Wide-Tail Softail to accept Avon's 230 X 15 Super Wide rear tire. This tire measures 250mm wide if fitted on an 8" wide rim. Kit bolts straight into both the stock Softail frame as well as the Zodiac WideTail frame. You can still use the final belt drive when used in a WideTail frame, a stock Softail must be converted to final chain drive or the late 20mm wide belt. When you use this narrow belt or a chain in a Zodiac WideTail frame you can easily go up to a 250 series tire.The complete kit includes:•Fully TIG welded swingarm with stainless fender extension plate•Swingarm pivot•Rear wheel axle with chrome nuts•Crankshaft extension for 1986 thru 1999 models•Extended crankshaft nut for 1991 thru 1999 models•Primary spacer with O-ring and bolts•Longer inner primary mounting bolts•Primary gasket set•Transmission off-set plate•A complete new bracket and hardware kit for the 5th transmission mounting studKits can also be used for 1987 thru 1990 models if correct crankshaft extension, extended sprocket shaft nut and primary gaskets are used. Due to the wide variety of wheels,fenders, fender struts, and wheel spacers are not included,these can be found elsewhere in this catalog.

Z236443

AQUATIC FACTORY REPLACEMENT STEREO FOR TOURING

Aquatic Bluetooth FLH/T98-13 radio Gen2

Z747973

AQUATIC FACTORY REPLACEMENT STEREO FOR TOURING

Aquatic Bluetooth Basic radio FLH/T98-13

Z747970

BANJO BOLT BRAKE LIGHT SWITCH

Z789830

Backväxel FLT/FLH 2009-2013 6 vxl låda

Fits stock 6-speed transmissions in 2009 thru 2013 Touring.

Z743402

Backväxel FLT/FLH 2014-2016 6 vxl låda

Fits stock 6-speed transmissions in 2014 thru 2016 Touring, 2012 to present Dyna and 2011 to present Softail (except 2016 to present FLSS and FLSTFBS)

Z743407

Backväxel HD 06- 6 vxl låda

Fits stock 6-speed transmissions in 2006 thru 2011 Dyna, 2007 thru 2010 Softail and 2007 thru 2008 Touring

Z743401

Backväxel HD 87-06 5 vxl låda

Fits stock and aftermarket 5 speed transmissions on 1987 thru 2006 Big Twin and Twin Cam.

Z743400

Backväxel Touring, FLSS, FLSTFBS 17-20

Fits stock 6-speed transmissions in 2017-2020 Touring, 2017 FLSS Slim S and FLSTFBS Fatboy S

Z743408

DK CUSTOM ROCKER LOCKERS

Tar bort det irriterande tickande ljudet som uppstår på dem flesta Harley förr eller senare! The Rocker Lockers eliminate the gap, locking the shaft from turning and striking the bolt, eliminating that annoying tick so many Harley owners experience. The Rocker Lockers also center the rocker plate so that it is always located in the same position eliminating different wear patterns on the rocker arm and valve and also provide a better alignment of the pushrod in the holes. The Rocker Lockers are tapered so that they lock themselves in and wedge the bolt/shaft in place. However, this is a single-use design. Once the rocker shafts have been removed you need a new set of Rocker Lockers. Easy to install with the included Teflon centering tool and step-by-step installation instructions. Specifications

Z754450

DK CUSTOM ROCKER LOCKERS

Tar bort det irriterande tickande ljudet som uppstår på dem flesta Harley förr eller senare! The Rocker Lockers eliminate the gap, locking the shaft from turning and striking the bolt, eliminating that annoying tick so many Harley owners experience. The Rocker Lockers also center the rocker plate so that it is always located in the same position eliminating different wear patterns on the rocker arm and valve and also provide a better alignment of the pushrod in the holes. The Rocker Lockers are tapered so that they lock themselves in and wedge the bolt/shaft in place. However, this is a single-use design. Once the rocker shafts have been removed you need a new set of Rocker Lockers. Easy to install with the included Teflon centering tool and step-by-step installation instructions. Specifications

Z754451

DK CUSTOM ROCKER LOCKERS

Tar bort det irriterande tickande ljudet som uppstår på dem flesta Harley förr eller senare! The Rocker Lockers eliminate the gap, locking the shaft from turning and striking the bolt, eliminating that annoying tick so many Harley owners experience. The Rocker Lockers also center the rocker plate so that it is always located in the same position eliminating different wear patterns on the rocker arm and valve and also provide a better alignment of the pushrod in the holes. The Rocker Lockers are tapered so that they lock themselves in and wedge the bolt/shaft in place. However, this is a single-use design. Once the rocker shafts have been removed you need a new set of Rocker Lockers. Easy to install with the included Teflon centering tool and step-by-step installation instructions. Specifications

Z754452

DK CUSTOM ROCKER LOCKERS

Tar bort det irriterande tickande ljudet som uppstår på dem flesta Harley förr eller senare! The Rocker Lockers eliminate the gap, locking the shaft from turning and striking the bolt, eliminating that annoying tick so many Harley owners experience. The Rocker Lockers also center the rocker plate so that it is always located in the same position eliminating different wear patterns on the rocker arm and valve and also provide a better alignment of the pushrod in the holes. The Rocker Lockers are tapered so that they lock themselves in and wedge the bolt/shaft in place. However, this is a single-use design. Once the rocker shafts have been removed you need a new set of Rocker Lockers. Easy to install with the included Teflon centering tool and step-by-step installation instructions. Specifications

Z754453

DK CUSTOM ROCKER LOCKERS

Tar bort det irriterande tickande ljudet som uppstår på dem flesta Harley förr eller senare! The Rocker Lockers eliminate the gap, locking the shaft from turning and striking the bolt, eliminating that annoying tick so many Harley owners experience. The Rocker Lockers also center the rocker plate so that it is always located in the same position eliminating different wear patterns on the rocker arm and valve and also provide a better alignment of the pushrod in the holes. The Rocker Lockers are tapered so that they lock themselves in and wedge the bolt/shaft in place. However, this is a single-use design. Once the rocker shafts have been removed you need a new set of Rocker Lockers. Easy to install with the included Teflon centering tool and step-by-step installation instructions. Specifications

Z754454

Dogbone risers 4" kromade

Artikel A!

Z745876

GUARDIAN ANGEL GREMLIN BELL

Z747160

HANDLEBAR, DRESSER STYLE

Z096004

Hardtail "RSD" Rear fenders 11" wide

11" wide

Z960427

Hardtail Bolt-on rear section for 1952 thru 1978 Sportster

Z781206

Hardtail rear section for 1973 thru 1978 Sportster. Weld-on top, bolt-on bottom for alignment

Z781207

Hardtail rear section for 1979 thru 1981 Sportster. Weld-on top, bolt-on bottom for alignment

Z781208

Hardtail rear section for 1982 thru 2003 Sportster. Weld-on top, bolt-on bottom for alignment

Z781209

INDIAN STYLE LEAF SPRING FORKS

Z747350

KRAFT/TECH RIGID DUAL STRAIGHT DOWN TUBE FRAMES

30 graders rake, 0" stretch, (130-140 däck) OBS frakt tillkommer 499:-

Z751480

KRAFT/TECH RIGID DUAL STRAIGHT DOWN TUBE FRAMES

34 graders rake, 4" stretch, (130-180 däck) OBS frakt tillkommer 499:-

Z751456

KRAFT/TECH RIGID DUAL STRAIGHT DOWN TUBE FRAMES

30 graders rake, 0" stretch, (130-180 däck) OBS frakt tillkommer 499:- (OBS bentleg på bilden)

Z751457

KRAFT/TECH RIGID DUAL STRAIGHT DOWN TUBE FRAMES

30 graders rake, 0" stretch, (130-180 däck) OBS frakt tillkommer 499:-

Z751481

Long Boy 21" bredd 4,25"

Z960402

Mark V Laser Drive Line Chain Alignment Tool

Whenever you have removed the rear wheel of your motorcycle, you need to re-align the chain or belt. This handy tool really takes the guesswork out of this job. By simply putting the Chain Alignment Tool on your sprocket or pulley, the laser beam indicates if everything is lined up properly. Correct alignment increases the lifetime of your complete drive train, tire, and wheel bearings, reduces fuel consumption and improves road holding. This Class-2 quality laser features a tolerance of less than 0.01mm per meter chain or belt and comes complete with three AG5 batteries. The Chain Alignment Tool is Made in Germany and economically priced-every bike owner should have one in his toolbox. It definitely is a must for professional workshops.

Z744397

Mutter belthjul/drev

06-17(NU)Dyna; 07-21 Softail; 07-21 Touring

Z237000

NEUTRAL SWITCH

08-12(NU)XR1200

Z781132

NEVR-DULL WADDING POLISH

Nevr-Dull is chemically impregnated cotton wadding manufactured under a special process. Cleans and polishes by the combination of special ingredients. All you do is tear off a small wad of Nevr-Dull and rub slowly over the surface to be cleaned, then take a clean dry cloth and gently buff. Your metal surfaces will shine like never before. Removes rust and tar while leaving a high luster and protective film on chrome, aluminum, brass and other surfaces.

Z232010

Pullback risers Deuce 5.5 höga 1-1/4 dia. M12x

Z241027

RAKED NECK KIT 3 DEGREES

Fits 1988 thru 2017 Softail and 1990 thru 2005 FXDWG. Includes chrome frame cup set, external fork stop tab, steering head bearings, dust covers, longer steering stem and adapter. Does not accept stock steering lock

Z781072

RAKED NECK KIT 3 DEGREES

Fits 1991 thru 2005 Dyna, except FXDWG. Includes chrome frame cup set, steering head bearings and longer steering stem

Z781074

Ridge Line Spartan for 16" thru 19" wheels

6 1/4"

Z950143

Ridgeline Spartan bredd 4,75"

Z950142

Ridgid Line Sabre 7 41/64"

7 41/64"

Z960186

SINGLE-SIDED SWINGARM FOR SOFTAIL

This Single Sided swingarm is constructed from beefy, heavy gauge steel tubing and allows you to fit an up to 250 series rear tire on an 8.00 x 18 or 9.00 x 18 wheel. This swing arm fits a stock style Evolution Softail or Twin Cam Softail frame in conjunction with a 25mm primary offset kit. For Evolution models you can use a 25mm primary offset ring with crankshaft extension with nut and 25mm offset transmission mounting plate or ZPN700889 offset kit. Twin Cam Softails through 2006 need ZPN700889 primary offset kit that features an extended transmission main drive shaft and 25mm extended main drive gear. 2007-up 6 Speed Twin Cam Softails use our latest ZPN701950 offset kit. The swingarm kit includes a polished rear disc brake rotor, polished 4 piston PM brake caliper with bracket, polished 20mm wide rear pulley and the stock type spherical swingarm bearings. The included trick caliper mounting bracket allows you to fit the caliper in down or upright position without the need of a separate brake torsion arm. The polished 20mm rear pulley features hard anodized and Teflon coated teeth for X-tra long running time. Due to the variety of applications the swingarm the primary offset kit and other required parts must be ordered separately. Kit needs to be used with 2007 type 20mm rear belt. Note: All parts in the offset kits are separately available. Note: Primary offset kit for 2012-2013 models also fits earlier models that are equipped with a Screamin' Eagle compensator OEM 40274-08 or 40274-08A. These feature only 1 thrust washer between the sprocket and sprocket retainer. Kit for 2014 to present models also fits earlier models that are equipped with a Screamin' Eagle compensator OEM 36500034A, 40100061, 4220064A or 42200095A. These feature a thrust needle bearing and 2 washers between the sprocket and sprocket retainer.

Z701944

SINGLE-SIDED SWINGARM FOR SOFTAIL

This Single Sided swingarm is constructed from beefy, heavy gauge steel tubing and allows you to fit an up to 250 series rear tire on an 8.00 x 18 or 9.00 x 18 wheel. This swing arm fits a stock style Evolution Softail or Twin Cam Softail frame in conjunction with a 25mm primary offset kit. For Evolution models you can use a 25mm primary offset ring with crankshaft extension with nut and 25mm offset transmission mounting plate or ZPN700889 offset kit. Twin Cam Softails through 2006 need ZPN700889 primary offset kit that features an extended transmission main drive shaft and 25mm extended main drive gear. 2007-up 6 Speed Twin Cam Softails use our latest ZPN701950 offset kit. The swingarm kit includes a polished rear disc brake rotor, polished 4 piston PM brake caliper with bracket, polished 20mm wide rear pulley and the stock type spherical swingarm bearings. The included trick caliper mounting bracket allows you to fit the caliper in down or upright position without the need of a separate brake torsion arm. The polished 20mm rear pulley features hard anodized and Teflon coated teeth for X-tra long running time. Due to the variety of applications the swingarm the primary offset kit and other required parts must be ordered separately. Kit needs to be used with 2007 type 20mm rear belt. Note: All parts in the offset kits are separately available. Note: Primary offset kit for 2012-2013 models also fits earlier models that are equipped with a Screamin' Eagle compensator OEM 40274-08 or 40274-08A. These feature only 1 thrust washer between the sprocket and sprocket retainer. Kit for 2014 to present models also fits earlier models that are equipped with a Screamin' Eagle compensator OEM 36500034A, 40100061, 4220064A or 42200095A. These feature a thrust needle bearing and 2 washers between the sprocket and sprocket retainer.

Z701945

SONIC EQUIPMENT OIL DRAIN PAN

4.2 US Gallons (15.9 Liter)

Z745624

Saracen 21" bredd 5,5"

Z960415

Saracen for 21" wheels

4 1/4"

Z960403

Skärmämne 11" bred täckta sidor Ø690

Z960422

Skärmämne 12,5" bred högerdrivning Ø690

Z960428

Skärmämne 12,5" bred vänsterdrivning Ø690

Z960424

Skärmämne 13 1/2" bred utan kedjeuttag Ø690

Z960450

Skärmämne 13,5" bred högerdrivning Ø690

Z960452

Skärmämne 13,5" bred vänsterdrivning Ø690

Z960451

Skärmämne 14 1/2" bred utan kedjeuttag Ø690 (kopia)

Z960454

Skärmämne 7,25" Smooth Sentry

Z960016

Skärmämne 8,5" Smooth Sentry

Z960017